Dear Mr Rawles,
I've been reading your archives. I loved the December, 2011 SurvivalBlog article titled Barter, Post-TEOTWAWKI: The Micro Store. This one is a natural for me.  One way that I have been collecting barterable items is at yard/garage/estate sales.  Estate sales in particular are excellent for the micro store collection.  You hit the kitchen area and get current food items for your own stores and then the bathroom for bandages and sample size items such as soap, shampoo, shaving gel, toothpaste and so forth.  I’m not talking about items used but items never opened; I have even found various supplements also never opened.  I told my sister the nurse that if TSHTF I have a small hospital for her.  Leg brace boots are also really very cheap and can come in very handy.  

One item I have seen a ton of is sewing supply; I am partial to those heavy duty needle packs that are bound to come in handy for patching up heavier gear, am looking for upholstery thread that would go well with those kits, or dental floss can used if needed.  As far as cigarettes, I can get those at half the cost from Indian tribe stores, I have placed individual packs in Seal-a-Meal bags and vacuum packed them and placed them in the freezer, also did that with cigars I picked up at a yard sale.  I don’t smoke but know that if a smoker is desperate enough, anything will do 

Another item that I think is very handy are those small pouches of seasonings, they have become quite expensive at a grocery store, up to $1.89 each. At estate and garage sales I pay a quarter or less for them. If you have potatoes, pasta or rice, one packet of flavoring will go a long way.  I do plan to get some of those little bottles of liquor that are sold on air flights, those are an excellent idea.  Going on to the garage area is great for fishing gear and tools.  I have come home with prepper items along with a few collectibles to sell on eBay.  The profit from what I sell on eBay covers the cost of my prepper item purchases. 

I was curious however, about my plan to move from Washington to Idaho. When I do find a small town to live in, wouldn’t those people already be prepper-minded thus making a micro store a moot point?  Just wondering.  My husband said we could just set up shop to an area that was not prepper-minded and sell/barter there.

Keep up this wonderful work and call me, - Prepper on the cheap.
   
JWR Replies: Don't worry about the lack of a barter market in a region with more predominant preparedness and self-sufficiency. Even there, you will find plenty of people that are not well prepared, or those who have overlooked some items that they will need. The sure bets will be expendable items like soap, tape, detergent, lubricants (especially two-stroke fuel-mixing oil), common caliber ammunition, salt, seeds, various liquid fuels, adhesives, batteries, flat earth tone camouflaging paints, and so forth.

In reading Don's response to my first article, I'm going to write about a subject I was saving for next month, but I think is germane now. And I'll probably forget it by then. Let's talk about reloading, which also gets short shrift in a lot of books.

Note--I'm not going to go into a great deal of technique here. There are books on that. If you like, I can provide my e-mail address and would be willing to answer questions that way. I'm also not going to tell you what brand of press or dies I use. If you want to know, or want my opinions, let JWR know, and I'll get you a private message.

First off, let me dispel the notion that reloading will save you money. I can almost guarantee you it will not. You will wind up spending more initially (on equipment and your first batch of components), then probably the same amount on components as you previously spent on ammo. Here's an example:

A box of generic factory-loaded 230 grain FMJ ball .45 ACP generally costs $25 at a big box store. If you use plated bullets (more on that later), you'll probably spend about $140 per thousand, or $.14 each. A pound of generic pistol powder is about $23. There are 7,000 grains of powder per pound. If you use five grains per round, you get 1,400 rounds out of a pound of powder for a per-round cost of $.0164, which we'll round up to $.02. A sleeve of 1,000 primers is about $32, or $.03 each. If you're cheap like I am and salvage brass from the range, you wind up spending about $.18 per round, or $9 per box of 50. Without averaging out the cost of equipment, you can make just over 100 rounds for what you'd pay a factory to load 50. So, why not just double your shooting for the same cash? Note this doesn't take into account what your time is worth. That's up to you, so I can't put a price on it. That's a really roundabout way of saying you'll be doing the ballistic equivalent of dollar-cost averaging.

There are items I didn't discuss, like buying jacketed bullets (more expensive), moly-coated lead (about the same as plated or just a bit cheaper), or casting your own (time-intensive, but potentially cheaper in the long run--like after you pay for the casting equipment). I also didn't discuss buying brass, which can be really cheap ($.05 per round or even less) or really expensive (brand name brass can cost as much as $.25 per round).

Now we need to discuss setting up to reload. There's need-to-have equipment and nice-to-have equipment. Then there's equipment that depends on your intended volume of reloading.

At the most basic level, you need a press, dies, a powder measure, scale, and a priming system. (Yes, I realize there are volume systems which allegedly obviate the need for a scale. I don't trust them. Tread at your own peril.).

Dies have four basic functions. They make the case round again and eject the spent primer. They "bell," or expand, the case mouth to allow you to put a bullet into it. They seat the bullet to the required depth (more on that later). And they crimp the case into the bullet. There are many quality dies out there at a variety of prices. I personally recommend against Forster or Redding, unless you're loading match-grade (read: sniper-grade) ammo. I have a mix of Lee, Hornady, and Dillon. RCBS also makes quality dies. Any of these four companies are quality makers. Note: Lee dies come with a shell holder for a single-stage press, the others do not. All of them come in handy storage cases.

One of the things you'll have to have is a set of calipers, to measure the overall length of the finished round. Bullets seated too long won't chamber. Bullets seated too short might cause excessive pressures in your chamber. You don't need to buy a set from a reloading supplier (Harbor Freight Tools, Lowe's, and Home Depot also carry them), but make sure you have a set.

The press is what the dies and shell holder screw into and provide the leverage to do the functions mentioned above. There are four basic types of presses. Hand presses are portable and are intended for low volume loading in the field, like for hunting ammo or doing load development.

Single-stage presses are what most people use to start. You perform a single function on the press with one die, then switch dies to change functions. Most people do all of their sizing and decapping first, then move to expanding the case mouth, etc. I have one of these for my low-volume operations, like magnum pistol and all of my rifle loading. Many single stage presses are sold in kits with all of the must-have pieces of equipment.

Turret presses allow you to mount all of your dies on the press at the same time, and switch dies by turning the turret. You could perform all four functions on a single case until you've produced a round of ammunition. I've never had one, so I can't say whether it's worth it.

Progressive presses are the opposite of the turret press, in that you mount all of the dies simultaneously, then the case moves from station to station to complete each step. This is for high-volume reloading and requires a somewhat large dedicated area to do it. Most progressive presses have on-board priming systems and powder measures, which takes care of a bunch of other steps and minimizes equipment requirements. Many people switch to a progressive press to increase their loading rates. I started out on a progressive press, because I was getting into USPSA shooting when I started reloading. Some progressive presses are sold in kits with the most-needed extras.

A powder measure puts the requisite charge of gunpowder into the case. Progressive presses have powder measures on the press itself. For single-stage reloaders, you'll have to mount it separately on your bench. Lee Precision dies come with a dipper to measure powder (I've never used one, because these types of "one size fits no one" solutions don't appeal to me--your mileage may vary).

ALL powder measures work on volume. That's how you can use multiple powders in the same measure. This brings us to the need for a scale. You can use digital or a fulcrum scale, but you need something to measure to a tenth of a grain. I use a digital scale, but you might want a spare in a Faraday cage or a spare fulcrum scale if you're sweating an EMP.

The final basic piece of equipment is the priming system. If you're using a single-stage press, there is a variety of priming systems to use on a press, or you can buy a separate hand primer. I tend to use a hand primer, but that lets me sit on the couch and prime brass while watching a movie or TV (Note: for all of my single-stage reloading, I'm a "coffee can" reloader, more on that in a bit.). Progressive presses have priming on board the press and prime on either the up or down stroke (relative to the movement of the ram or shell plate assembly. I prefer priming on the down stroke, because it gives me more feel for the primer seating. Your mileage may vary.

One thing I didn't mention is a reloading manual. Some are printed by powder manufacturers, others by bullet companies. Lee Precision includes a set of recipes in their die sets (Note: the recipes are pretty conservative, so you won't get maximum performance, but you'll be safe). I prefer the powder manuals, because you get an idea of how the powder performs against a wider variety of bullet types than those made by the bullet companies (who publish against the types of bullets they manufacture, rather than a generic bullet). Some have a variety of manuals and cross-reference them. I tend to use one brand of powder, so I don't have to do that. (Note: Hodgdon Powder is a Christian-owned company, and that's the main reason I use them. That's my only stated preference in this article.)

A couple of other notes. If you buy carbide dies, you won't have to lubricate most handgun brass. If you are reloading long handgun brass (like .500 Smith and Wesson Magnum), handgun brass with a bottlenecked case (like .357 SIG or 5.7x28), or are reloading rifle ammunition, you'll have to lubricate the brass, regardless of the type of dies you buy. Some lubricants will compromise your powder and primers, so I generally relegate those to my single-stage operations. Aerosol lubricants are easier to use than those in a bottle, which you normally lubricate by rolling across a pad.

I also referenced "coffee can" reloading earlier. When I use a single-stage press, I do each operation separately and move the brass between coffee cans during each operation. So, I clean my brass, then put it into a container. Then I size and de-prime, moving from one container to another. If I had to lubricate the brass, I clean it again and put it into a container. Then I prime it, taking from one container, priming the brass, then putting it into another. Then I charge with powder, seat and crimp a bullet, then put it into a container for transport the range.

Now for the nice-to-have equipment. I like to have a bullet puller to correct my mistakes and salvage bullets and brass. I also have a tumbler to clean my brass and save wear and tear on my dies, but you can get the same result by putting your brass in a mesh bag (like the kind ladies buy to wash their delicates) and running them in the dishwasher. Some people have bullet and case feeders for their progressive presses, but I find them too expensive to buy at this time (maybe if I ever win a lottery). The last thing you probably want to have is a case block. At its simplest, this is a block of wood with a series of holes drilled into it to keep them together and keep you from knocking them over and spilling your powder all over the place. You'll only have to do this once to understand.

There are other considerations, but this pretty much covers the basics. If you can, have a friend walk you thru the process and give you suggestions, or check out a book at the library.

To address Don's basic question, I still buy some loaded ammo, even though I reload. Rimfire isn't reloadable, so I buy that, obviously. I don't reload shotgun shells (although I'm considering starting to, so I can generate my own supply). I buy some rifle and pistol ammo to ensure I always have a ready supply, in case I don't have time to reload ammo before I need it. So, the simple answer is, if you're reloading, keep a supply on hand to supplement your reloading. Figure out what you have on hand for components, then buy about half that much in loaded ammo. Use only reloads for proficiency shooting.

For my purposes, I have components for about 500 rounds of ammo to reload at all times. Some, like 9mm or 5.56, I have at least a thousand (I have 3/4 of a five-gallon bucket of 9mm brass, for example). I also have a growing supply of factory-loaded ammo.

I also try to limit my purchases of odd-caliber weapons. 9mm, .40 S&W, .357 Magnum, and .45 ACP are the most common calibers of handgun ammunition in America. .223, .308, .30-06, and 7.62x39 are the most common rifle calibers. Your survival weapons should be in those calibers for defense against humans or taking game larger than rabbits (use .22 Long Rifle for that). If you have hunting weapons not in those calibers, I'd recommend keeping at least 200 rounds for each weapon you intend to employ.

Aside--I recently purchased a self-defense rifle in .300 AAC Blackout, mostly for close to midrange work and the wide variety of bullet weights it can employ. I have 200 rounds for it and plan to get that up to at least 1000.

One thing to remember is that .308 Winchester and .223 Remington are not the same as 5.56 and 7.62x51 NATO, respectively.

A final set of notes-much of the supply of foreign-manufactured ammo is Berdan primed, and is not reloadable (because of how the primer pocket is formed). If you want your factory-loaded supply to be reloadable, look for Boxer primed ammo. Also, steel-cased or aluminum-cased ammunition should never be reloaded. Steel-cased ammo will gall your dies. Aluminum-cased ammo will be compromised after the first firing. Neither will work for you, regardless of primer type.

Good luck, and I wish you happy reloading!

I got myself into prepping and survivalism after the turn of the century, so my main resource was the Internet. That in and of itself was a whole learning process, as well -- but the scope of this article will focus on what appeared to be an amazing find in that great, infinite Google. $80 for an accurate, reliable, rugged bolt-action repeater that was on-par with a .30-06, ballistically... and had dirt-cheap ammo, to boot? There had to be a catch, and oh, how the forum-goers toting $5,000 AR setups assured me (and plenty of people in similar metaphorical boats) that it couldn't hit the broad side of a barn (from the inside), it blew up, all the bolts stuck, the triggers were horrible and couldn't be fixed, and the corrosive ammo wasn't worth the trouble.

Boy, how I learned how wrong they were. Though I've had a fascination with the rifles for quite some time, I ended up acquiring other weapons first, as fate would have it. However, I've since gotten my own example, and no longer have to bother friends or roommates to get a chance to toy around with one (although an acquaintance at gunsmithing school had a beautiful 91/30 he'd refinished the wood on, himself).

My rifle is a round receiver Tula, 91/30. I was lucky enough to get one with an excellent bore, bolt, and all the accessories (oiler, tools in cloth wrap, sling, bayonet and two ammo pouches), while paying only $90 in-person. $80 online is still a perfectly fair price, even after transfer and shipping -- though I would advise anyone purchasing multiple specimens, or other qualifying weapons, to consider a Curio and Relic license, if that is in your interest.

The rifle's main detriment that I've determined thus far? The sights. They're not bad -- though I'm biased, and apparently an abnormality when it comes to American shooters raised with traditional American guns, for the most part. However, the majority of my open-sight shooting since adulthood has been with an AK variant, which has very similar sights, anyway. That doesn't change what they are, though; crude, dark, and on some guns, not even adjustable to make your point-of-aim the same as point-of-impact. A $5 part fixes this, and I suspect that the better quality sample you acquire, the less likely the phenomenon is. If you're new to Russian sights, try to remember that it's something you get used to. There's nothing directly 'wrong' with them; they're not always as precise, and they're just different.

In the course of my life to date, I've fired three Mosins, including my own. They have all been 91/30s, and I have never seen any of them malfunction, not that bolt actions are particularly susceptible. A common story I found online, initially, had me worried about 'sticky bolt.' Don't believe everything you read, though; degreasing the gun (with one of a variety of methods, or multiple, ideally) will eliminate this problem nine out of ten times. My rifle's action is as smooth as my Mauser. Sticky bolt happens when cosmoline is not completely removed from the gun, and subsequently heats up and turns to a very sticky, unfavorable substance. Removing it is slightly harder after that happens, but still easy, in any case. Make sure you remove all cosmoline before shooting your rifle at all. While it won't wreck the gun, it's just not a good idea to let it build up.

Another problem mentioned for the guns is the relative difficulty of mounting a scope. A traditional job can be done to flop the bolt handle and fandagle a mount like the sniper Mosin variants had, and while those are fine, they are not my recommendation. The Brass Stacker mount goes over the rear sight, solidly locks, and allows a scout-style scope to be mounted -- my choice being a Simmons Prohunter in fixed 4x power. The mount is superior to similar ones not only in quality, but in that it allows the rifle's iron sights to stay on the rifle, unchanged. Any weapon you have for real-world use should have iron sights, even if it also has an optic. Right now, that translates to being able to keep hunting if your scope malfunctions; post-SHTF, that could mean still making accurate hits instead of area-effect fire after an optic goes down. Regardless, a scope is not necessary with these weapons; [the Finnish army marksman] Simo Hayha demonstrated that well enough. My strategy thus far is going to be to scope two rifles (for me and my lady-friend), and keep the rest with iron sights, mainly as backup and hand-out weapons.

If you've never shot a Mosin, and you get an opportunity to, accuracy test it and you'll be surprised. Obviously, surplus ammo is less accurate than current-manufacture, but a scoped 91/30 will absolutely keep up with other surplus rifles. I wouldn't feel under-gunned shooting it against a Mauser, assuming it wasn't sporterized. If you picked a good rifle and use good ammunition, 1 MOA isn't uncommon with quality optics. Iron sights, expect whatever your proficiency level is; my rifle outshoots me, and I'm not a terrible shot, by any means.

One unfortunate thing that is true of Mosins is that the stripper clips suck. No bones to pick about this one; rimmed casings make them awkward. Some are completely unusable, others just difficult, but they're nothing I'd ever trust my life to. Furthermore, they're expensive! While SKS stripper clips are cents a piece, Mosin ones can be as much as $3-5 per clip! For an $80 rifle, that's not worth it, to me -- but they're unreliable, either way, and I thusly recommend sticking to hand-loading [the internal magazine on] these [with individual cartridges]. For what they are, if you're doing everything correctly, an absolute speed-reload shouldn't be as necessary as with other weapons. Make your shots count and learn to load by hand as quickly as possible.

Getting a Mosin quickly teaches you about corrosive ammo. I'm still learning, on that account, but the method I've been using is to disassemble the gun, spray the metal parts down with Windex to soak, and then let more Windex flow through the bore. Apparently, the ammonia is thought to be good for removing corrosive salts, but I can't attest to that. Some people use hot water to the same effect, and I wouldn't feel uncomfortable doing so. In any case, after your corrosion-cleaner of choice, clean the rifle as normal -- though, thoroughly, especially if you don't shoot often or are going to store the rifle for any length of time. Better safe than sorry. Surplus ammo has acceptable, although certainly not outstanding accuracy. Don't be afraid of corrosive ammunition if it's your first experience with it. Again, it's just different; take care of the gun and it'll take care of you.

While the rifles aren't light, they're very well-balanced. A fiberglass stock would help, but again, I don't recommend getting that simply because of the price. Recoil is stiff, but not overly so. If you've fired a .30-06 in a similar configuration, a 91/30 is nothing new. Carbine variants will blow your hat off and singe your hair, though. While they're very cool, I find the longer rifle makes more sense because of the role I'll be describing for it to fill -- and again, because it's much less expensive than its smaller cousins.

With all of this being said, what is a Mosin, to a prepper? I have to preface by making it clear that I understand there are better alternatives, but it needs to be said that there is not a better value in a centerfire survival weapon, especially to a newcomer into survivalism. A Mosin is a budget marksman's rifle, or sniper rifle if outfitted properly. For under a hundred dollars, you have a full-power centerfire rifle with inexpensive ammunition that can take down game animals, and easily incapacitate any threats -- and better yet, at range. While a 12 gauge shotgun can be similarly inexpensive if a good deal is found (and I recommend a Remington 870 per person in your group's arsenal), a Mosin allows you to effectively neutralize threats at a greater distance, with greater accuracy, and significantly less expensive ammo.

Ambush is the prepper's friend. Guns-blazing shootouts are not what you want, whether it's a roving band of outlaws, or coalition forces you're having to deal with. In most situations, distance is preferable, and this also allows greater use of stealth and camouflage, and potentially using the landscape to your team's advantage, as well. Ground forces fear snipers, and deploying snipers effectively makes for an insane force multiplier. An $80 rifle and a little training will take you a lot farther than a spendy AR and no experience.

While I have to encourage everyone to find the autoloading carbine of your choice (I recommend the AK most of all, though I prefer the FAL, excepting its price tag), remember that the longest-serving rifle in history isn't obsolete just yet. They make great gifts and backup weapons, and are easy to encourage new preppers to invest in. Inexpensive, reliable, accurate, and fun as Heck to shoot. If you're new to shooting, get one and practice on the cheap. If you're seasoned, get a few and hide them away -- along with a few spam cans of ammo, of course.

James,

To follow up on M.B.'s article: I use the 12" Tramontina machete all the time.  Using a hacksaw to make it more pointed, I dropped the point 7/16" and put a 1 3/4" long false edge on top with a 1/8" wide bevel, and this shortened the blade to about 11 3/8." It was easy to get the top edge perfectly straight with a file. This drop point makes it an effective stabber without weakening the blade.  

The cutting edge was sharpened with a double cut bastard file, then a single cut smooth file to put a 1/8" bevel on both sides of the blade. The edge is finished with a Big John Super Stick Ceramic Sharpening Rod  ($6.49) from SMKW.com. This ceramic sharpener is roughly the size of the machete, and it's great for sharpening tools and large blades. The Tennessee Big Stick Ceramic Sharpening Rod  ($1.99) is thinner but also a good size.  Great values and good stocking presents for Christmas.

I'm lucky to have a nice sheath from a Meyerco Combination Axe Machete ($26.99) that had its edge break.  I use the Tramontina knife all the time as a large box cutter to cut cardboard. It's plenty sharp and holds an edge well, and it sharpens easily.  They are available for about $5.

Sincerely, - Hardy Citrus

The purchase of good-quality knives for long-term use can be a huge challenge for preppers. Buying a knife is a lot like hiring a lawyer: when you ask how much a good one will cost, the answer you get is often, "How much would you like to spend?"

A good knife for general usage often starts at $80 to $100, and prices can quickly escalate into the hundreds of dollars. Knife aficionados on the online forums often speak of spending several hundred dollars for the "perfect" survival/tactical/combat knife from a famous custom maker. To collectors and to some users, this is a reasonable price, but many of us on a tight budget can see better uses for such a sum of money. For one thing, we want every adult in our family or survival group to have one or more good, dependable knives. Additionally, anyone who has used knives in the outdoors knows that no single knife can do everything -- we often need a few knives to properly address the large and small jobs that require a knife or other cutting tool. Most of the knives discussed in this article have a maximum price of $25. Many knives in this price range are simply junk, but there are exceptions, some of which are described here. I have personal experience with all of these knives, unless otherwise stated. I've owned them, used them and learned some of their strengths and weaknesses. They come from a variety of places, but none are made in China.

Let's start by looking at what many of us consider to be the essentials, in terms of knives. Rather than looking for a single, "perfect" knife, some of us try to select a knife "kit" for each adult, to better handle a variety of tasks.

THE KNIFE "KIT"

My approach to the knife kit is to obtain one large, fixed blade knife for general use and big tasks, one medium-sized fixed blade or strong folder for general utility, and a multitool or multiple blade pocket knife for small jobs and for tasks requiring special tools, such as scissors, a screwdriver, a can opener, etc. My personal kit consists of three tools: (1) a 12-inch Tramontina machete, (2) either a custom knife I made from a Frosts of Sweden "Mora" knife or a Svord Peasant folder, and (3) either a Leatherman Tool or a Swiss Army "Recruit" pocket knife. I find that these knives allow me to tackle any of the tasks that are appropriate for a knife. My entire kit (with the Swiss Army knife and the Svord Peasant Knife) can be purchased for well under $75.

COMPROMISES IN LOW-COST KNIVES

There is some truth in the old adage: "You get what you pay for." The companies selling high-quality knives for low prices have to make compromises to do so. Generally, this means that most of the money and effort goes into the blade. That's good, because the blade governs much of the knife's capabilities. It is possible for a budget-minded user to address shortcomings in handles and/or sheaths with a few basic tools and a little bit of time. Don't expect Kydex sheaths or exotic handle materials in the low price range. In some cases (most machetes), no sheath will be included, and you may need to make your own or to have one made. Other sheaths may be suitable for carry in a pack, but not on a belt, again requiring the user to make or buy their own sheath if that is not acceptable. Handles may require some sanding or other finish work for best comfort and performance.

Most knives in this price range have thin blades. This is not necessarily a huge disadvantage. Many of the knives carried by mountain men and those who followed to settle the western United States had thin blades. In general, thin blades take a fierce edge with less effort than a thicker blade, and they slice well. A thin-bladed knife is often a good choice for dressing wild game or for preparing food.

Thin does not always mean weak. Machetes are usually thin, yet they are tough and springy. Some small, thin knives can be tougher than you may expect. Some thin-bladed sheath knives can be "batonned" -- pounded on the spine with a heavy stick -- to cut down small trees or to cut larger pieces of wood in a pinch. This is abuse, but some knives -- especially many of the Mora fixed blade knives -- seem to tolerate it without damage. Thin-bladed knives are usually lighter and easier to carry than thicker knives. This is a big factor in a knife chosen to go in a G.O.O.D. bag. Conversely, some thick knives are poor slicers and are heavy enough to feel clumsy for almost any task other than chopping.

Sheaths for smaller knives can be made by the prepper, with either leather or Kydex plastic. Kydex has the advantage of being weatherproof. It is also possible to heat it and form it to make a sheath that holds the knife in place without any straps or keepers. For a very inexpensive sheath -- especially for larger blades, such as machetes -- the plastic in trash cans for home use is very good. It can be cut, drilled and riveted, much like leather, but it's very weather resistant and long-lasting. Trash can plastic is less expensive than either leather or Kydex, yet it can be made into an excellent sheath.

SCANDINAVIAN KNIVES

Low-cost "Mora" knives from Sweden are very popular with outdoor people, especially in recent years. These fixed blade knives come in a wide variety of styles, in both stainless and carbon steel. Handles can be wood or plastic, and sheaths are almost always made of plastic. The blades tend to be somewhat thin, and the blade grinds are different from what most knife users are accustomed to. Most knives have a primary bevel and a small secondary bevel that forms the sharpened edge. With Scandinavian knives, there is no secondary bevel. The primary bevel -- which may be about 1/4-inch (about 11mm) wide -- is laid directly on the sharpening stone. The resulting edge can be surprising sharp. Many people who are not fans of knives have trouble correctly sharpening a knife with a traditional secondary bevel. When they buy a Mora and learn the simple sharpening method, it may be the first time that they've owned a really sharp knife.

Mora knives are very low in price: often in the $10-20 range. The traditional Moras, with a simple hardwood handle and carbon steel blade, are among my favorites. Others may prefer a stainless blade and plastic handle for a low-maintenance knife. In any case, the area at the base of the blade should be looked at carefully. Some Moras have a small gap here, where bacteria and/or moisture can get in, under the handle. In these cases, I simply clean the area with alcohol and apply a small amount of a good grade of epoxy, such as JB Weld, to seal off the opening. If the opening extends down into the handle, I use enough epoxy to completely fill it, with the intention of strengthening the knife as well as sealing the handle/blade junction.

Some Moras come with simple but functional sheaths, while others may not be suitable for daily carry. I generally make a simple leather or Kydex sheath (usually Kydex) as a replacement. By the way, Kydex does not require a suite of expensive tools. My "presses" are made from scrap wood and mouse pads, and I assemble the sheaths with regular rivets made for leather, or with pieces of narrow-diameter, soft copper tubing (from the plumbing section of big hardware stores) flared to make eyelets. I've even used pliers to turn large paper clips into heavy-duty "staples" for sheaths.

A good source for Swedish Mora knives is Ragweed Forge. "Ragnar," the owner, offers the best selection of Mora knives I've seen so far, along with information about sharpening. His customer service is very good, and the prices are fair.

The Ahti "Finman" is a Finnish fixed blade knife, It is very similar in design, and in price, to the Mora knives. Ragweed Forge offers one version, with a stainless blade and a green handle and sheath. It needs to have a handle gap -- at the base of the blade -- filled with epoxy, but it is a very practical and useful medium-sized fixed blade knife. The stainless blade and rubberized handle make it a good all-weather tool. I frequently carry mine as a pocket knife -- in casual pants with generous front pockets.

Another Scandinavian brand to consider seriously is Marttiini, from Finland. Many of us are familiar with their "Rapala" line of fillet knives for fishing. My Rapala is very light in weight and the long, narrow, flexible stainless blade takes and holds a very good edge. It came with a traditional wood handle and a superbly practical plastic-lined "dangle" sheath of good leather. A sharp, thin blade is extremely useful for more than fish, and mine has been our only kitchen knife on some of our trips. It served very well in that role. All it needed to make it ready for use was a tiny amount of JB Weld epoxy around the base of the blade, to seal the handle. It cost me under $15: a bargain. I found it in a large sporting goods store.

OPINEL AND COLD STEEL KNIVES

Opinel folding knives are wonderfully useful. Consisting of little more than a hardwood handle, a blade, a pivot pin, and a rotating collar that locks the blade open, they lock open with authority and are one of the simplest, strongest designs available. The Opinel's blade has a nail nick and the knife requires two hands to open it, like a traditional pocket knife. Because the lock does not engage when the blade opens -- but must be engaged manually -- Opinels may be legal for carry in jurisdictions that ban some "tactical" folders. The blades are flat-ground and are very thin at the edge. As a result, Opinels can be made scary sharp in very little time and are wonderful slicers that hold their edges well. They can be found in a variety of sizes, with either carbon steel or with stainless blades. Although the blades are thin, they are stronger than you might expect and made an excellent choice for a daily-carry pocket knife. Opinels are very inexpensive, as well. Smoky Mountain Knife Works carries several Opinel folders, most of which are in our price range.

Cold Steel used to make their own version of the Opinel: the Twistmaster. With a Zytel handle and a "Carbon V" blade, the Cold Steel version was stronger than the French original, although it tended to be a bit thick at the edge and didn't slice quite as well as the Opinel. The Twistmaster corrected the one shortcoming of the Opinel: in wet conditions, the hardwood handle could swell, making the knife very difficult to open. The Zytel handle of the Cold Steel was unaffected by moisture. Both the Opinels and the Twistmasters (if you can find a used one) are recommended as pocket-sized cutting tools, just as long as you don't try to use them as a chopping tool or a pry bar.

SVORD PEASANT KNIFE

Svord Knives in New Zealand makes the Peasant Knife: a folder that has become one of my all-time favorite knives. It's one of the simplest folders available. The knife consists of two post screws, a blade, two handle scales, and one pin. It can be completely dismantled in a few moments for a complete cleaning. The carbon steel blade has a flat grind, similar to that of the Opinel, and its cutting abilities are similar.

There are no springs in a Peasant Knife. It uses a long tang that sticks out of the closed knife and lays along the back of the handle when the knife is open. The user's hand holds the tang in place and keeps the knife from closing. The tang makes the closed knife somewhat longer than most knives in its size class, but I use it to draw the knife out of my pocket. The Svord Peasant Knife is available with wood, plastic or aluminum handle scales. I purchased mine with the plastic handles, and I believe that the plastic handles are the best choice for preppers. They are strong and light and are textured for a good grip. A wide variety of Svord Peasant Knives can be found at Knife Center. All are in our price range.

TRAMONTINA AND ONTARIO MACHETES

For a large knife, I chose a Tramontina machete with a hardwood handle and a 12-inch, carbon steel blade. The hardwood handle allowed me to customize the machete to fit my hand better, using a pocket knife and some sandpaper. I use the Tramontina machete more as a large knife than as a small machete. Although the blade is long, it is light and thin enough for the Tramontina to be used in the camp kitchen, and it will slice tomatoes or onions with ease. I sharpen machetes with a small file, and the slightly rough edge from the file seems to stay sharp longer than one would expect from a machete blade with a "spring" temper. Machete Specialists offers the 12-inch Tramontina, with the item number TR26620012.

The Tramontina is too light for a dedicated chopping tool. It could be used to cut poles for a shelter or for a stretcher, but if I expected to use it for chopping, I would choose a 12-inch Ontario machete. Avoid the "economy" version of the Ontario that is sold in some places. The original has a 1/8-inch thick blade and is a much better chopping tool. I was also unhappy with the "D" handle models and strongly prefer the original handle type. The exact Ontario machete that I recommend is sold under item number ONCT1 at Knife Center.

I prefer to use machetes as large knives that can be used to chop, rather than as dedicated choppers. Chopping makes noise that can disturb other campers today; after a crunch, it could attract two-legged predators. A small folding saw is my wood cutter of choice, although a sharp machete can be used to split damp kindling in wet conditions, or to make fuzz sticks. I tend to keep my fires small, and I generally do not need an axe or large chopping tool to prepare and maintain a fire.

A short machete is a fearsome weapon, if needed. The 12-inch Tramontina machete is not a heavy chopper, but it's very quick in the hands and could deliver a much more serious slash than most folding knives or small fixed blades. The edge bevel at the point of the blade needs some work with a file to sharpen it properly. Someone seeking an edged weapon should probably look at the 12-inch Ontario machete. It also needs some attention to the bevel at the point. The Ontario's blade is stiffer and heavier than the Tramontina's blade, and it could be a very effective self-defense weapon at close quarters. Longer machetes, on the other hand, handle more like a sword than a big knife and require more skill and hand/wrist strength to be efficient defensive weapons.

SWISS ARMY KNIVES

No discussion of bargain knives would be complete without mentioning Swiss Army Knives. Both Victorinox and Wenger offer some basic knives in our price range. One of my favorites is the Victorinox Recruit. It is a Swiss version of the classic Boy Scout pocket knife. It is inexpensive and tremendously useful as a light-duty, multipurpose tool. Another Victorinox knife has a big following: the Farmer. Although it's a little above our price range, it has metal scales instead of red plastic, and it features the wood saw: one of the most useful of Swiss Army tools. Victorinox and Wenger Swiss Army Knives are available from a wide variety of sources.

A SHOVEL?

I find myself keeping one large "chopper" around and using it frequently: the Cold Steel Special Forces Shovel. Many who have served in the military know the value of a small shovel as a general-purpose digging/cutting/hacking tool. I sharpen the edges with a file to make it a more efficient digging tool, capable of chopping through roots or breaking up hard soil. It could also be used to cut wood, in a pinch. The blade would need regular attention to keep it sharp, however. Heavy chopping can also put terrific stress on a shovel handle. If I planned to do a lot of chopping, I would wrap the area where the blade attaches to the handle with some wire, or with epoxy-saturated cord or twine, to reinforce it. This is the weakest part of any shovel. The Special Forces Shovel can be purchased direct from Cold Steel.

My Special Forces Shovel is kept sharp and has a blade cover made from trash can plastic, with two pieces of nylon webbing and snaps to hold the shovel in place. A few holes drilled near the edges of the blade cover allow my Cold Steel shovel to be lashed to the side of my pack for carry.

The Cold Steel SF Shovel can also be a low-profile weapon. A sharpened shovel, spade, or entrenching tool has been used countless times in infantry close-quarters combat. It can slice like a knife or chop like an axe. If used for a while as a shovel, it will show the marks of a tool and will be less suspicious than a brand-new, razor sharp shovel. Mine travels under the radar and has never been questioned. Its scarred handle and well-used blade make it look like what it is: a small, useful shovel.

CONCLUSION

Choose your tools carefully, and they should serve you well. Don't forget to invest in files, ceramic sticks, sharpening stones, oil, and other accessories needed to keep your cutting tools sharp and in good condition. Carbon steel knives that are used frequently with food can be kept rust-free by drying after use and wiping with any type of cooking oil. Take care of them, and buy a few extras as spares, or as trade goods. Good knives may be hard to come by after a Crunch.

JWR:
Just a note about current firearms inventories at the major distributors from a 25 year industry veteran.  A majority of the medium to large size firearms wholesalers are experiencing significant stock shortages and inventories are at a “historic low”.   AR and AK inventories (regardless of manufacture or builder) are drying up very fast.  Most wholesalers are not taking back-orders from dealers on these items until the smoke clears.  Even handgun inventories are starting to get very thin, especially center-fire semi-autos.  The situation on ammo is better, but many industry retail purchasing agents coming out of this year’s SHOT Show where warned by several major ammunition manufactures about this year’s third and fourth quarter demand will likely outstrip availability and most manufactures are at, or near full capacity. 

But I have some good news for reloaders:   Most major brands of powder, primers, and bullets are back in stock to pre-2008 levels and primer prices have come down considerably in the last 12 months (at least at the wholesale level).  Group buys from major inter-net component providers can give you the lowest delivered cost, especially with rising shipping and hazmat fees.  Take the time to talk to your dealer about your local situation and act accordingly. - Rick S.

JWR Replies: I have noticed that guns shows have become noticeably more crowded in recent months. Even a tiny little 25 table show at a nearby Elks Lodge was so packed that I could scarcely walk from table to table. There is definitely some well-justified angst in the country about the upcoming presidential election. The general consensus seems to be that President Bolt Hold Open (BHO) will take the gloves off, if he gets re-elected. We can expect a flurry of executive orders that as a minimum would ban the importation of most semi-auto firearms, 11+ round magazines, and all military gun parts sets. Stock up, folks!

James Wesley:
For use as an unobtrusive and inexpensive alternative to purpose-built weapons safes, I recommend finding an old, non-functional soda vending machine. Remove the guts (we call it the 'stack') and refrigeration system, but leave the lights in the door. (Be careful, the light ballast wiring will bite: 5,000 volts).
 
Tap into the 110 Volt AC wiring on the vending machine to power your Goldenrod Dehumidifier.
 
Store your valuables inside where the guts used to be.  Lock the door and keep the key.  [If it will be at your private business but in a location that might ever be in view of the public,] you can leave the machine plugged in, with the lights on, and an 'Out Of Order' sign taped on the front. Consider this instant stealth storage. - Tom K.

James,
First of all thank you for running SurvivalBlog as it is has been a valuable source of information. Years ago, you mentioned Zanotti Armor as a high quality gun safe company, I'm glad you did, as I am now a very happy customer! I ordered the ZA-3 6-foot--the largest safe available from the company--and it fits my needs perfectly. It only took two of us to move all the [modular] pieces to the basement and assemble the walls. It required two extra pair of hands to assemble the top and door. I ordered the safe in June and received it in March. The customer service was excellent throughout the whole process and even after the safe arrived. At the beginning when I asked for a quote they steered me in the right direction and even when asked for certain features, such as lighting, they let me know that I could get what I wanted locally and for less money.

After installing the safe I contacted the company to ask what paint I should use on a couple of scratches in the front due to our hurried assembly they sent me a small bottle of touch up paint at no charge. Great safe and a great company. I only have one issue with the safe - it makes my gun collection look small! I guess I'll just have to start filling it up soon! Thanks, - John in Wisconsin

Much has been written about what particular guns are best for home defense and SHTF, but I haven’t seen much about taking care of these weapons when gunsmiths are not around.  Let’s look at what typically causes firearms to fail. 

As a gunsmith, the main cause of firing malfunctions I see is dirt.  This can be crud built up from dust collecting in oil forming a grease-like substance, or rust, or build-up from burned powder (carbon), or residue from the casings or shells.

The second most encountered problems stem from magazines, or broken or weak springs.  Lost pins or screws, and broken extractors or firing pins tend to be the next [most common] group of failures.

So how do you prepare for these problems?  First, if you don’t have an owner’s manual for your gun, go to the manufacturer’s web site and download one.  It will give you information on proper operation, how to field strip the gun for cleaning, and lubrication instructions.  If it is an older gun, you may be able to find a manual at StevesPages.com.  The next document you should have is an exploded parts list and instructions on disassembly and assembly of the firearm.  Many of these are also available at StevesPages.com. 

The next thing you will need is a good cleaning kit.  Be sure you have lots of patches, and extra bore brushes for your particular caliber.  A chamber brush is also helpful.  There are all types of bore cleaner solvents.  Pick your flavor.  Here is a recipe for a great bore cleaner that you can make up yourself.  It was invented by C.E. ''Ed'' Harris. You can always bottle some of it for barter later.  It is the widely-used “Ed’s Red” (ER).   This cleaner has an action very similar to standard military issue rifle bore cleaner, such as Mil-C-372B. Users report it is more effective than Hoppe's for removing plastic fouling in shotgun bores, or caked carbon fouling in semi-automatic rifles or pistols, or in removing leading in revolvers. It is not as effective as Sweets 7.62, Hoppe's Bench Rest Nine or Shooter's Choice for fast removal of heavy copper fouling in rifle bores. However, because "ER" is more effective in removing caked carbon and abrasive primer residues than other cleaners, metal fouling is greatly reduced when "ER" is used on a continuing basis.  It is inexpensive, effective, provides good corrosion protection and adequate residual lubrication so that routine "oiling" after cleaning is rarely necessary, except for long-term storage of over 1 year, or harsh service environments, such as salt water exposure.

CONTENTS: Ed's Red Bore Cleaner
1 part Dexron II, IIe or III Automatic Transmission Fluid (ATF), GM Spec. D-20265 or later.
1 part Kerosene - deodorized, K1
1 part Aliphatic Mineral Spirits, Fed. Spec. TT-T-2981F, CAS #64741-49-9, or may substitute "Stoddard Solvent", CAS #8052-41-3, or equivalent, (aka "Varsol")
1 part Acetone, CAS #67-64-1.
(Optional up to 1 lb. of Lanolin, Anhydrous, USP per gallon. It is okay to substitute Lanolin, Modified, Topical Lubricant, from the drug store)

MIXING INSTRUCTIONS FOR "ER" BORE CLEANER:

[JWR Adds This Warning: All of the usual precautions for handling caustic and flammable solvent fluids must be taken, such as wearing goggles and rubber gloves.]

Mix outdoors, in good ventilation. Use a clean 1 gallon metal, chemical resistant, heavy gauge PET or PVC plastic container. NFPA approved plastic gasoline storage containers are also okay. Do NOT use a HDPE container, which is permeable, because the acetone will eventually evaporate. The acetone in ER will also attack HDPE, causing the container to collapse, making a big mess!

Add the ATF first. Use the empty ATF container to measure the other components, so that it is thoroughly mixed. If you incorporate the lanolin into the mixture, melt this carefully in a double boiler, taking precautions against fire. Pour the melted lanolin it into a larger container, rinsing the lanolin container with the bore cleaner mix, and stirring until it is all dissolved. Divert a small quantity, up to 4 ounces per quart of the 50-50 ATF/kerosene mix for optional use as an "ER-compatible" gun oil. This can be done without impairing the effectiveness of the remaining mix.

Label with necessary SAFETY WARNINGS: RIFLE BORE CLEANER, CAUTION: FLAMMABLE MIXTURE, HARMFUL OR FATAL IF SWALLOWED. KEEP OUT OF REACH OF CHILDREN.  Flammable mixture! Keep away from heat, sparks or flame. FIRST AID, If swallowed DO NOT induce vomiting, call physician immediately. In case of eye contact immediately flush thoroughly with water and call a physician. For skin contact wash thoroughly.

The lanolin can be found at better pharmacies like CVS or Walgreens.  Ask the pharmacist, they usually have it in the back, not out on the shelves.

Ed’s Red will not dissolve copper fouling, so have some copper remover solution on hand.  Be aware that the ammonia in the copper remover can damage stock finishes, and will dissolve brass bore brushes.  Have some extra brushes on hand, or use a stainless steel brush.

The next item to have on hand is a quality gun oil.  They are all pretty good.  Note above that you can make your own from ATF/kerosene mix.  If you want to improve on this, add a little lanolin.  The lanolin provides longer term protection, since some of the other ingredients will eventually evaporate.

INSTRUCTIONS FOR USING "Ed's Red (ER)" Bore Cleaner:
Open the firearm action and ensure the bore is clear. Cleaning is most effective when done while the barrel is still warm to the touch from firing. Saturate a cotton patch with bore cleaner, wrap or impale on jag and push it through the bore from breech to muzzle. The patch should be a snug fit. Let the first patch fall off and do not pull it back into the bore.
Wet a second patch, and similarly start it into the bore from the breech, this time scrubbing from the throat area forward in 4-5" strokes and gradually advancing until the patch emerges out the muzzle. Waiting approximately 1 minute to let the bore cleaner soak will improve its action.

For pitted, heavily carbon-fouled guns, leaded revolvers or neglected bores a bronze brush wet with bore cleaner may be used to remove stubborn deposits. This is unnecessary for smooth, target-grade barrels in routine use.

Use a final wet patch pushed straight through the bore to flush out loosened residue dissolved by Ed's Red. Let the patch fall off the jag without pulling it back into the bore. If you are finished firing, leaving the bore wet will protect it from rust for 1 year under average conditions.

If the lanolin is incorporated into the mixture, it will protect the firearm from rust for up to two years. For longer term use Lee Liquid Alox as a Cosmoline substitute. "ER" will readily remove hardened Alox or Cosmoline.
Wipe spilled Ed's Red from exterior surfaces before storing the gun. While Ed's Red is harmless to blue and nickel finishes, the acetone it contains is harmful to most wood finishes.
Before firing again, push two dry patches through the bore and dry the chamber, using a patch wrapped around a suitably sized brush or jag. First shot point of impact usually will not be disturbed by Ed's Red if the bore is cleaned as described. It is always good practice to clean your guns twice, two days a apart whenever using corrosively-primed ammunition, just to make sure you get all the corrosive residue out. [JWR Adds: If in doubt about the priming used in any batch of military surplus ammunition or any ammunition of any description that is made in Eastern Europe or China, clean your guns repeatedly!]

Remember, after cleaning, you can apply a thin layer of oil to protect from rust.  Blued or parkerized finishes will still rust.  But notice, I say “thin”.  Excess oil will attract dirt, and can freeze an action in very cold weather.

Now, for spare parts.  Replacement spring sets are available for most guns, usually for about $10 to $20.  They are inexpensive, and can be purchased from www.Brownells.com  or www.Midway.com.   The other items I would recommend are replacement pin kits, a spare firing pin, and a spare extractor.  If you have an odd or old gun, you may be able to find parts from Numrich at www.GunPartsCorp.com.  Some guns like an AR-15 have critical spare parts kits available for around $35.  Even if you don’t feel comfortable replacing some of these parts, gunsmiths will be around, and if you have the parts, and diagrams, they can fix it for you.

Recommended tools would include a basic gunsmithing screwdriver set, some pin punches, a plastic faced or rawhide hammer, needle nose pliers, and some sort of vise, with padding for the jaws.  Specialty tools might be a broken shell extractor for your caliber rifle.

Battery powered optical sights are great, but be sure to have spare batteries, and some sort of iron back-up sights in the event they break.  Extra magazines are also essential.

I don’t want to get into specific guns to buy, but I would recommend a “reliable” one.  Cheap or worn-out guns should be replaced now.  You can keep old ones for barter, but don’t rely on them for yourself.  Also, some guns can cycle reliably on any ammo you feed it, while others are very sensitive to different loads and brands.  You may not be able to have the luxury of buying the exact brand that you like in a SHTF situation, so maybe it is time to trade for one that is happy with anything.  Most new guns need at least 500 rounds run through to properly break them in.  Another good reason to practice!

Another good source of information on particular firearms are the gun forums online.  For instance, GlockTalk.com, AK-Builder.com, FALFiles.com, or AR-15.com. You will learn pretty much all that you need to learn from them.  Just remember, as with this and any info you find on the internet, use common sense applying it.

The last few years have seen the development of an interesting legal mechanism called the gun trust. Gun trusts use estate planning law to deal with, and in some cases legally circumvent, arcane and restrictive federal laws that regulate the use and possession of certain types of firearms. These federal statutes make up the National Firearms Act (NFA), a series of laws that require registration of guns such as machine guns, short barreled rifles and shotguns, and sound suppressors (aka silencers). They are often referred to as Title 2 weapons because they are regulated under Title 2 of the 1968 Gun Control Act. Many people mistakenly call them Class 3 weapons, but Class 3 refers to the dealers of these weapons, not the weapons themselves.

History of the National Firearms Act

The NFA was passed in 1934 in response to the gang violence of that time. It imposed a tax on certain firearms thought to contribute to the growing "gangster" crime problem, including machine guns, short barreled rifles and shotguns, and silencers. In an effort to discourage possession of these types of weapons, individuals were required to register them with the federal government and pay a tax stamp fee of $200. The NFA was amended in 1968 and again in 1986, but its basic provisions remain unchanged: national registration of certain weapons and payment of a $200 tax per weapon, or $5 for devices classified as Any Other Weapon. ("AOWs").

The NFA has strict requirements and carries stiff penalties for violations. Essentially, only a registered owner of an NFA weapon may be in possession of that weapon. Illegal possession of an NFA firearm carries a prison sentence of up to 10 years and/or a fine of up to $250,000. Be forewarned, “possession” can be a relative and arbitrary term in the eyes of the Bureau of Alcohol, Tobacco, Firearms, and Explosives (ATF).

ATF Requirements

Title 2 weapons must be registered with the ATF through an extensive and lengthy application process. Whether you are purchasing a weapon from a Class 3 dealer or building your own (many people will make their own short barreled rifle out of an existing non-NFA weapon such as an AR-15-style rifle), you must first go through ATF to have it transferred to you. ATF requires that you fill out the appropriate form, affix a two-by-two inch photograph of yourself along with fingerprints, and have the application signed by your local chief law enforcement officer (CLEO) [this is the police chief inside of city limits or the county sheriff if you live outside of city limits.] The $200 must be included, and that is for each weapon. Once the application is approved you will receive notice and the weapon may then be transferred to you. The approval time may take anywhere from three to six months.

The Gun Trust

NFA gun trusts have become popular in recent years as an alternative to individual registration. The central idea behind a gun trust is that the trust itself is the registered owner for NFA purposes, and anyone listed in it as trustee may legally possess the NFA weapons as trust property. There are basically three types of individuals in a gun trust: grantor/settlor, trustee, and beneficiary.

The grantor, or settlor, is the person who sets up the trust. This is usually the individual who wants to register and own Title 2 weapons but also wants other people to be able to use and possess those weapons. The grantor will submit the application to ATF but instead of registering the weapon in their name, he or she will list the trust as the owner. Trustees are individuals who, along with the grantor, will hold the trust property for the beneficiary. Trustees may legally possess NFA weapons in the trust even though they are not listed on the application. Trustees must be at least 18 years old (federal law prohibits anyone under 18 from possessing NFA weapons, and anyone under 21 from purchasing NFA weapons from a Class 3 dealer) and not be otherwise prohibited from possessing firearms. Finally, the beneficiary is the individual who receives the trust property upon the death of the grantor. The grantor can list as many beneficiaries as he or she likes, and there is no age requirement under federal law to be a beneficiary. Thus minor children can be named beneficiaries, and should the grantor die before the beneficiary is of age to take possession a trustee can be designated to hold onto the trust property.

Advantages of a Gun Trust

Gun trusts can be set up to be very flexible. Most are established as a revocable trust, which means it can be changed by the grantor during his or her life. When the grantor dies the trust becomes irrevocable, and changes can no longer be made. With a revocable trust, the grantor may add or subtract individuals or weapons to and from the trust as necessary.

Another advantage is that a trust allows the grantor to legally bypass many ATF application requirements. Fingerprints, photographs, and CLEO signature are not required. Not only can this speed up the process, but it’s nice to be able to tell the government, “No, I don’t have to give you that information.”

Sometimes people will ask about setting up a corporation as the registered owner, but I think trusts are better. Trusts are generally private and do not require public filing (this may not be the case in every state so you should check with a local attorney on this). Corporations are public, do require filing, and also require annual maintenance fees and taxes. For these reasons, trusts are a better way to go.

Should I go the gun trust route?

It depends on your situation, but generally I recommend yes. The trust will be in effect for your life and longer, and with the strict laws that govern NFA weapons it is reassuring to know that you can plan for the distribution of the trust property. For instance, gun trusts are usually good for families. A husband can name his wife, and perhaps other close relatives, as trustees, and his children as beneficiaries. It really just depends on your situation and your long-term goals.

It also depends on where you live, and here I must include the obligatory disclaimer: NFA weapons are not legal in every state. If you are considering getting into the world of Title 2 guns, then please check your state laws. All the information I have given you in this article is based on federal law, but state law applies too and that may differ. I suggest contacting a gun trust attorney in your state to discuss your options.

Patrick Stegall is a Memphis, Tennessee lawyer. Part of his practice is concentrated on drafting NFA gun trusts for individuals and families in Tennessee. For more information please visit him online at Tennessee Gun Trust Lawyer, or e-mail him at pstegall@stegall-law.com.